Support For Earlier Norwood Sawmill Models

 

Norwood sawmills that went into service over 30 years ago are still going strong. So, if you’re the proud owner of a classic Norwood, you can count on it to keep milling lots of valuable lumber for you for years to come.

 

Earlier Model Portable Sawmills	Norwood LumberMate MK1–MK4 Sawmill (1992–2000) Norwood LumberMate 2000 Sawmill (2000–2010) Norwood LumberLite LL24 Sawmill (2004–2010) Norwood LumberMate Pro MX34 Sawmill (2010–2013) Norwood LumberLite ML26 Sawmill (2010–2013)
Parts & Attachments Support	Norwood continues to carry a wide selection of optional attachments and accessories for earlier-model mills. If you need any of these attachments or any spare parts, just call Norwood for pricing and ordering at 1-844-294-0694 (North America) or +1-705-325-0030 (International).
Serial Number Records	To ensure that you get the right equipment for your machine, Norwood keeps detailed records of every Norwood sawmill ever built. When you call us, a customer-service representative will cross-reference your sawmill’s serial numbers and give you personalized advice on your mill’s technical history. If you just bought your Norwood sawmill second-hand, call to register your ownership right away.

Bed Extensions (4 ft (1.2 m) Permanent)	Extend your cutting length with one or more bed extensions. Each 4-foot bed extension bolts permanently to the end of the bed. Additional optional log rest/log-dog assemblies sold separately. Note: Maximum of one 4-foot extension permitted in combination with a trailer-equipped portable sawmill.
Compatible Sawmills & Item Numbers	LumberMate 2000: Item No. 41130 LumberLite LL24: Item No. LL24-EXT LumberMate Pro MX34: Item No. LM34-41130 LumberLite ML26: Item No. ML26-41130

Lap Siding and Shingle Making Package	Make shiplap siding and cedar shingles quickly and easily. With this unique sawmill jig, cut lap-siding up to 9” (22.5 cm) wide, with taper widths down to a feather-edge. Reconfigure the jigs and make cedar-shake shingles 9” (22.5 cm) wide and up to 16” (40 cm) long — each pass makes two shingles. Two jigs per set.
Compatible Sawmills & Item Numbers	LumberMate MK1-MK4: Item No. 41270-MK2 LumberMate 2000: Item No. 41270-MK2 LumberLite LL24: Item No. 41270-MK2 LumberMate Pro MX34: Item No. 41270-MK2 LumberLite ML26: Item No. 41270-MK2

Log Loading/Rolling and Ramp Package

Load large logs onto your Norwood portable sawmill with ease and hold them in place for quick-dogging. Simply pass the cable over and then under the center of the log, connect to the frame and operate the winch—the log rolls up the ramps and onto the bed. Also, makes rotating (rolling) the log while on the bed a snap to speed up squaring cants. Package includes two ramps complete with repositioning rollers, winch, mast/boom & receiver and log-rolling hook.

Compatible Sawmills & Item Numbers

LumberMate 2000: Item No. 41400 LumberMate Pro MX34: Item No. LM34-41400 LumberLite ML26: Item No. ML26-41400

Cam Dogs	Instant clamping of squared cants and boards on your LumberMate 2000 band sawmill with a quick push of the handle. Use your standard LumberMate 2000 log dogs to clamp your log in the round, and the cam-dogs to clamp squared cants and boards. Designed with a blunt-nose to reduce marring of your lumber. Clamp as low as ¾” above bunk height. Two units per set.
Compatible Sawmills & Item Numbers	LumberMate 2000: Item No. CD01

1½” Blade System

The Norwood LumberMate 2000 portable sawmill came standard with 1¼” blade guide rollers to accommodate Norwood’s 1¼” blades. While 1¼” blades are the ideal all-purpose choice, suitable for milling both hard and softwood logs, you may want to upgrade your mill to the 1½” blade guide system and use 1½” blades if you specialize in milling large hardwoods commercially. System includes two 1½” blade-guide rollers each equipped with two sealed bearings. Note: Available only for V-twin-equipped LumberMate 2000.

Compatible Sawmills & Item Numbers

LumberMate 2000: Item No. 41220

Sawmill Carriage Cover	Protect your investment against damage from the elements. Made from the same rugged material used for transport-truck covers, Norwood’s carriage covers are rip-resistant, rot-resistant, UV-resistant and pliable even at freezing temperatures. Tailored to fit snuggly over the whole carriage
Compatible Sawmills & Item Numbers	LumberMate 2000: Item No. 41290 LumberLite LL24: Item No. LL24 CC LumberMate Pro MX34: Item No. LM34-41290 LumberLite ML26: Item No. ML26-41290

Vertical Log Posts

Vertical log post system bolts directly to the LumberMate 2000’s cross-bunks and offers perfect squaring of cants. When used alone, vertical log posts are ideal for squaring cants and small-diameter logs. When used with the standard log posts, they provide additional support when milling large-diameter logs. Mount units to any cross-bunk station to suit your specific milling requirements. Set includes two 18” posts, brackets and hardware.

Compatible Sawmills & Item Numbers

LumberMate 2000: Item No. LM2K-LPVK

Log Dog/Log Rest Kit	Add extra log clamping stations to your log deck to provide additional support to logs of different lengths. Each set includes a standard log dog and log rest, mounting bracketry and hardware (one log dog/rest station per kit).
Compatible Sawmills & Item Numbers	LumberMate MK2-MK4: Item No. LM2K-DRKIT (Upgrade to LM2K system) LumberMate 2000: Item No. LM2K-DRKIT LumberLite LL24: Item No. LL24-DRKIT LumberMate Pro MX34: Item No. LM34-DRKIT LumberLite ML26: Item No. ML26-DRKIT

Dura-Guide™ Ceramic Blade Guides

Originally designed for the LumberMate 2000, LumberLite ML26 owners can now also benefit from the improved performance delivered by Norwood’s patented ceramic guides. The Dura-Guides deliver full 3-sided support to maximize stability in the cut. The ceramics are more durable than rollers & bearings, they run cooler and virtually silent, and are less affected by sawdust build-up and freezing. And, because they eliminate blade deflection and down-pressure, they help extend blade life. Kit includes a pair of precision-machined patented ceramic blade guide blocks and shafts, a complete set of ceramic inserts, a template and all hardware.

Compatible Sawmills & Item Numbers

LumberMate 2000: Item No. MILL-BGCRK LumberLite ML26: Item No. MILL-BGCRK

Auto Blade Lube System	Automate the blade lubrication system on your sawmill. Water automatically flows when you activate the throttle, and stops when you release. Saves two operator functions for each board you cut.
Compatible Sawmills & Item Numbers	LumberLite ML26: Item No. MILL-WLKIT

Board Offloading Rollers	Offload lumber fast and easy with a set of board offloaders. Push the fresh-sawn board onto the bunk-mounted rollers, and shoot it down to the end of the bed for fast, efficient unloading and stacking. Quickly retractable so there’s zero interference when milling oversized logs and cants. Four roller assemblies per set.
Compatible Sawmills & Item Numbers	LumberMate Pro MX34: Item No. 41287 LumberLite ML26: Item No. 41287