Promo banner

Ota meihin yhteyttä 1-800-567-0404

  • Globaali johtaja kannettavassa sahainnovaatiossa
  • Globaali johtaja kannettavassa sahainnovaatiossa
  • Mills toimittaa heti 2 päivän kuluttua

Classic 10 7/8" Pitch Bandsaw -terillä

SKU: BLD129-SB1-CLAS10-78

€198,95

129 "terät ovat yhteensopivia:
OS23

144 "terät ovat yhteensopivia:
MN27, LM30, MN26, LM29, MK3, MK4, LM2K, LL24, OS27, OS31, HM126, HM130, LT10

167 "terät ovat yhteensopivia:
HD36, HD36V2, HD38, LM34, OS35, H360, HFE-30, HFE-36

Sawyers on luottanut monien vuosien ajan klassisiin Sabretooth -yhtyeisiin luotettavan leikkausesityksen tuottamiseksi. Ne on valmistettu ylemmästä korkean hiilisen Yhdysvaltain teräksestä, jossa on tarkkuusmahdollisuusprofiili, huipputekninen induktiohampaiden kovettuminen ja tiukasti sietävä tasapainoinen sarja. 10º Pintakulma on ihanteellinen havupuiden ja lehtipuiden yleiskäyttöön. 7º on erityisesti suunniteltu lehtipuille ja jäädytetylle puulle, mutta ne ovat myös erinomainen valinta sekoitettuun sahaamiseen.

TÄRKEÄÄ: Kaikissa tapauksissa säännöllinen ja tarkka terän ylläpito on kriittistä suoran, sileän puutavaran jauhamiseksi ja terien käyttöiän pidentämiseksi. Teroita terät vähintään muutaman tunnin välein ja nollaa hampaat säännöllisesti. Huomaa, että kulutustuotteille, kuten vyölle, terille tai laakereille, ei ole takuuta. 

BUY MORE SAVE MORE

Valitse mitat

Questions?

Chat with a Norwood specialist.

THE SABRETOOTH CLASSIC LEGACY

For years, the SabreTooth Classic blades have set the standard in precision and durability, earning the trust of sawyers worldwide. Known for their consistent performance and superior longevity, these blades have become the go-to choice for professionals seeking reliable results in their milling operations.

TARKKUMAADOTTU PROFIILI, EI KOSKAAN PUISTETTU

SabreTooth Classic 10:ssä on tarkasti hiotut hampaat, jotka takaavat tarkkuuden ja tasalaatuisuuden, mikä johtaa tasaisempiin leikkauksiin ja hiottujen materiaalien hienompaan viimeistelyyn. Maadoitettujen hampaiden suorituskyky on parempi ja stressi pienempi kuin rei'itettyjen hampaiden, mikä minimoi rikkoutumisriskin ja pidentää terän käyttöikää.

Product Information

10° hook angle for all-purpose sawing of softwoods and mixed woods.

The SabreTooth Classic 10 with 7/8 inch tooth spacing, is our most popular bandsaw sawmill blade profile. Crafted from high-quality, high-carbon U.S. steel, this blade boasts a precision-ground tooth profile for enhanced accuracy and advanced induction teeth tip hardening and a tightly controlled, balanced raker 3 tooth set for optimal stability. With a 10° face angle and 7/8" tooth spacing, the Classic 10 balances cutting speed and outstanding performance. It is an excellent choice for general-purpose sawing of softwoods and some mixed hardwoods.

Specifications:

• 1 1/4" Blade width
• 0.042" Blade thickness
• 7/8" (1.14 TPI) Pitch (tooth spacing)
• 10° Face hook angle
• Manufactured with U.S. Carbon Steel
• Sharpen with aluminum oxide grinding wheel

IMPORTANT: In all cases, regular and precise blade maintenance is critical for milling straight, smooth lumber and extending blade life. Sharpen your blades at least every couple of hours of milling and reset the teeth regularly. Please note that there is no warranty on consumable items, such as belts, blades, or bearings.

Sawmill Compatibility

107.5" blades are compatible with:
OS18

129" blades are compatible with:
OS23

144" blades are compatible with:
LM30, MN27, MN26, LM29, MK3, MK4, LM2K, LL24, OS27, OS31,
HM126, HM130, LT10

158" blades are compatible with:
HM130MAX, LT15START, LT15, LT20, LT25/27, LT28, LT30, LT35, LT40, LT50

167" blades are compatible with:
HD38, HD36V2, HD36, LM34, OS35
, H360,HFE-30, HFE-36

Portable bandsaw sawmill blades come in different profiles and materials to suit specific tasks. Key characteristics to consider include face hook angle, pitch (tooth spacing), gullet depth, and tooth set. Flex-back blades are made from flexible carbon steel with hardened tooth tips for general use. Premium blades constructed with high-speed steel or other alloys to enhance durability and cutting performance. Tipped blades feature super hard alloy tips, like Stellite or tungsten carbide, for superior wear resistance and cutting precision.

The face hook angle on a bandsaw blade refers to the tilt of the teeth relative to the blade's vertical line. A higher hook angle means the teeth are angled forward, enhancing the blade's aggressiveness for cutting, and is ideal for faster feed rates. A lower hook angle, where the teeth align closer to vertical, balance cutting speed with control, especially useful for milling harder woods and frozen logs. The choice of hook angle depends on the material type and desired outcomes, such as cutting speed and finish quality.

Tooth spacing, or pitch, on a bandsaw blade greatly influences cutting performance. Wider tooth spacing (larger pitch) enables faster cutting by removing more material with each pass, ideal for quicker cuts. Finer tooth spacing (smaller pitch) yields a smoother finish, better suited for harder materials or when a more precise cut is needed. Additionally, the pitch impacts chip clearance; larger pitches improve chip clearance, reducing the risk of clogging, which is particularly beneficial when cutting wood with high sap content.

Note: 7/8" pitch has become the most popular tooth spacing that is seen in most bandsaw sawmill blades. In the past a 3/4" pitch was commonly used for hardwoods, but many sawyers are having success with the 7/8" spacing with a less aggressive hook angle for better sawdust management or upgrading to a more premium blade option.

Gullet depth is the distance from the bottom of the gullet to the blade tip and plays a critical role in managing sawdust. A deep gullet profile has added space in the gullet which allows more sawdust to be carried before reaching capacity. This specialized feature boosts performance, particularly when milling wide boards.

The number of teeth and the angle at which they are offset is referred to as tooth set. Tooth set affects cutting efficiency, and quality of the cut. Carbon steel sawmill band blades with tempered teeth tips typically follow a Raker three tooth pattern with a uniform set distance left and right, and a third straight “raker” tooth.

Whether you’re cutting hard or softwood, a sharp blade is essential to produce high-quality lumber on your Sawmill. A sharp blade also cuts with less effort meaning less strain for you and your sawmill’s engine. As a blade gets dull its cutting performance decreases and it will take more time and effort to push through a cut. A sharp blade leaves a relatively smooth surface, when the blade loses its sharpness cut surfaces become noticeably rougher or more ragged. A dull blade may not hold its path and can dive during a cut. Finally, listen for changes in the sound of the saw, often a higher-pitched screeching or increased noise levels suggest the blade is struggling to cut through the material.



Note: A telling sign you’ve pushed a blade beyond its capacity to produce marketable boards is if you see smoke during cutting or find burn marks on the cut surface. This indicates the blade is generating excessive friction due to dullness. Ideally you should never run a blade to this point as you will get more board feet out of a blade if you sharpen it more often to maintain a precision edge.

For optimal performance of a standard carbon blade, it's recommended to sharpen a standard carbon steel blade profile approximately every two hours of cutting time. This may vary depending on the quality of blade and the material being cut. We advise honing the blade tips to maintain their sharpness rather than grinding a dull blade to reshape the edge.

Wear and tear resulting from regular use is a natural part of the life span of a band blade, which are subject to high physical loads on a daily basis. Visually inspect a blade for signs of stress, cracks in the metal, heavy wear, or damage to determine if it is safe to put back on the sawmill. When the metal gets fatigued and visible cracks are seen in the gullet, this is a serious sign to retire the blade. Tooth breakage will quickly put an unnatural end to a band blade and can happen at any point in the blade’s life. Damaged or broken teeth often result from striking a foreign object such as a rock or nail.