Sawmill Blades

Maximum sharpness. Longer blade life. Fully automatic blade sharpener for heavy-duty use, delivering consistently razor-sharp blades for precise, straight cuts. Once the SabreTooth Blade Sharpener is set to your blades’ specifications, the fully-automatic operation with integrated digital shut off does the rest of the work for you. Complete a full sharpening cycle in only minutes so your blade is back on the mill and cutting timber. What's Included: Sharpener with 12 V DC, 15 W, 6500 rpm (Feed Motor) and 12 V DC, 110 W, 3500 rpm (Grinding Wheel Motor) Blade support arms (3) Sturdy 4-legged stand with battery shelf Integrated digital shut off timer 143.5mm x 5 mm alumina oxide grinding wheel Grinding wheel shaping stone

For sawyers who demand the best performance from their bandsaw blades, the SabreTooth ProSetter™ is engineered to quickly restore tooth set so you can produce beautiful timber. The ProSetter™ uses semi-automatic operation to perfectly set two teeth in one motion making it significantly faster than single-action tooth setters. Blades lose tooth set over time, reducing their ability to clear sawdust from the cut. Setting blade teeth is recommended every second time the blade is sharpened to reduce the risk of wavy or scored lumber. Blade Range: Width: 1-1/4" to 1-1/2" (32 mm to 38 mm) Tooth Spacing: 3/4" to 1" (19 mm to 25 mm) Thickness: 0.042" to 0.043" (1.07 mm to 1.10 mm) Dual-Action Design The semi-automatic design simultaneously operates dual bending anvils and the blade advance. The dual gauges and precise adjustment controls ensure accurate results every time. Fast and Easy Operation By setting both the left and right blade teeth in one motion, the ProSetter completes a cycle in half the time of single-action setters and doesn’t require the blade to be flipped.

Keep your Automatic Blade Sharpener operating efficiently with a replacement grinding wheel. The durable aluminum oxide abrasive wheel breaks down at an controlled rate to maintain the continual sharpness of your carbon steel bandsaw blades. A consistent porosity bond ensures maximum grain retention for long wheel life. Inspect the grinding wheel for visible signs of damage and replace it if the integrity of the wheel is compromised or when it becomes too small to perform effectively. Arbor size: 7/8" (22.2 mm) Wheel diameter: 5-21/32" (143.5 mm) Wheel thickness: 3/16" (5 mm)